These lines might be the problem:
main error: polling error: Non-socket handle specified
Which version of VLC do you use?

Hi,

I'm using Andvlc 1.1.5, dated 20-11-2010. I downloaded it a few days ago.

It almost certainly seems a port issue, i can set port 5544 (or others) in the Andtv client on my phone, as far as i understand i don't have to set that port in Andvlc on the pc somewhere?

Yes, that's right, it only needs to be set in AndTV's preferences, though you have to reopen any file/channel, that the change become in effect.

Do you have more than 1 network adapter (including virtual adapters)? Then try to deactivate every adapter, except for the one connected to your local network.

What happens if you regularly try to stream with VLC? Is the same error showing up?

HI Giso, thanks for your prompt replies.

I have disabled other network adapters but no go.

Update 11 january:

i am able to stream the DVB-T signal with VLC through the UDP protocol.
I set VLC to the capture device DVB-T, set the frequency and bandwith, enter the udp protocol, set the destination IP to another laptop, at that laptop i start vlcplayer and open network stream udp://@:1234 and the DVB-T signal is play from a laptop with the DVB-T stick to the other laptop with VLC.

I haven't founde a UDP player for android so i am unable to test this streaming to android. I am unable to stream using rtsp protocol (which is port 5544) from the laptop to another laptop, i dont know why.

I'll try to explain my setup in detail in hope you can think of something.

Connected to my HP Probook 5310m with Windows 7 is a Pinnacle PCTV 340e DVB-T USB stick.
I can watch DVB-T channels bij starting VLC, setting the transponder frequency to 474000000 and bandwith to 8Mhz.
The HP Probook is connected wirelessly to a TP-LINK 1043N router.

My Samsung Galaxy S android phone is running Froyo 2.2, and is also connected wirelessly. When starting Andtv and choosing a channel, i see ANDVLC on the HP Probook switching to that channel. After a few seconds, the progress bar of the running show is shown on my Samsung phone, and i can browse the EPG info. When i hit the > Play symbol in Andtv, a screen Buffering... is shown. Buffering stays at 0/100, and ends in an error after about 15 seconds. Andvlc on the laptop then hangs (im able to switch bewteen various menu items in Andvlc, but i can't exit, i have to kill Andvlc).

I'm not quite convinced about my channels.conf, especially i don't know what the third and second before last codes mean (1021 & 1022). I figured out that the last code is corresponding with the program number in the Codec Details shown in VLC when playing a DVB-T channel. Here is a snippet of my channels.conf:

Nederland 2:474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_7_8:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:1021:1022:1102

Any help is appreciated.

I just can't get VLC Player to stream rstp streams. The logfiles keep mentioning "main error: polling error: Non-socket handle specified".

I've tried to connect the laptop with (And)VLC wirelessly and wired. I tried to play rtsp://:5544/andtv.sdp on my phone using ANDtv and Streaming Media Player, and i tried to play that stream on other pc's in the LAN: no go. So i'm sure the laptop with (And)VLC is just not streaming, but i'm unable to determine how to troubleshoot "main error: polling error: Non-socket handle specified".

Have you tried to connect with this url? For connecting, you need to enter the ip address. It is just the server, who doesn't need to, because it just needs to listen for connections.

I think i have tried rtsp://10.0.0.169:5544/andtv.sdp , where 10.0.0.169 is the ip address of the laptop where andvlc is running. I will try again tomorrow.

Great, glad to hear it works now.

Какие-то проблемы с с сайтом- не все страницы открываются, у меня что-то все поехало. Обратитесь в нормальную контору по разработке сайтов, посмотрите вот тут или вот тут